[English below]
Tóm tắt công việc:
Báo cáo cho Giám sát SMT, Nhân viên thiết lập dây chuyền SMT chịu trách nhiệm chuẩn bị và cài đặt thiết bị SMT trước mỗi đợt chạy sản xuất. Công việc bao gồm chuẩn bị feeder (thiết bị gắn vào máy gắp linh kiện), nạp_chương trình, kiểm tra vật tư và đảm bảo dây chuyền được cấu hình chính xác, hiệu quả theo yêu cầu đơn_hàng.
Vị trí này đóng vai trò quan trọng trong việc giảm thiểu thời gian chờ và đảm bảo chất lượng lắp ráp trong môi_trường sản xuất tốc độ cao.
Nhiệm vụ và trách nhiệm chính:
- Thiết lập feeder và linh kiện: Chuẩn bị và nạp feeder theo bảng thiết lập và danh mục vật tư (BOM); đảm_bảo mã linh kiện, số lượng và chiều lắp đặt chính xác.
• Cấu hình dây chuyền: Cấu hình máy gắp linh kiện, máy in kem hàn và lò hàn nhiệt độ theo thông số đơn_hàng và yêu cầu sản xuất.
• Nạp chương trình: Tải và kiểm tra chương trình máy, dữ liệu stencil và tệp kiểm tra; báo cáo sai lệch cho bộ phận Kỹ thuật khi cần.
• Kiểm tra vật tư: Đảm bảo tất cả vật tư bao gồm PCB, linh kiện và stencil đều chính xác và sẵn sàng trước_khi chạy đơn hàng.
- Hỗ trợ First Article: Hỗ trợ sản xuất mẫu đầu tiên bằng cách kiểm tra vị trí linh kiện và cung cấp tài liệu cho bộ phận Chất lượng và Kỹ thuật.
• Tài liệu và truy xuất: Đảm bảo quét mã đầy đủ và khả năng truy xuất của linh kiện và bảng mạch qua hệ_thống quản lý sản xuất.
- Bảo trì thiết bị SMT: Thực hiện các công việc bảo trì cơ bản và kiểm tra feeder, máy móc nhằm đảm bảo vận hành ổn định; báo cáo sự cố khi cần.
• Chuyển đổi đơn hàng: Hỗ trợ việc chuyển đổi đơn hàng hiệu quả bằng cách tháo gỡ thiết lập cũ và chuẩn_bị cho đơn hàng kế tiếp với thời gian chờ tối thiểu.
• Tuân thủ an toàn và ESD: Thực hiện đúng quy trình xử lý tĩnh điện (ESD) và quy định an toàn lao động.
Các nhiệm vụ khác: Thực hiện các công việc bổ sung khác nhằm hỗ trợ sản xuất và đảm bảo chất lượng.
Yêu cầu tối thiểu:
- Tối thiểu 2 năm kinh nghiệm thiết lập dây chuyền SMT hoặc hỗ trợ sản xuất SMT.
- Hiểu rõ về thiết bị SMT và quy trình thiết lập feeder (ưu tiên Yamaha, Fuji hoặc tương đương).
- Tốt nghiệp THPT; có đào tạo kỹ thuật điện tử là điểm cộng.
- Có khả năng đọc và hiểu BOM, bảng thiết lập, bản vẽ lắp ráp và hướng dẫn công việc.
- Nắm vững kiến thức cơ bản về nhận dạng, chiều đặt và xử lý linh kiện.
- Có thể đứng lâu và nâng vật nặng từ 9–14kg.
Kỹ năng và năng lực:
- Kỹ năng tổ chức và quản lý thời gian tốt.
- Tỉ mỉ và chính xác cao trong thiết lập và kiểm tra vật tư.
- Sử dụng thành thạo máy quét mã vạch và hệ thống thu thập dữ liệu sản xuất.
- Giao tiếp hiệu quả với nhân viên vận hành, kỹ sư và quản lý.
- Có khả năng làm việc trong môi trường sản xuất đa dạng, tốc độ cao.
Hồ sơ ứng viên lý tưởng:
Ứng viên lý tưởng là người đáng tin cậy, chú trọng chi tiết và luôn đảm bảo thiết lập dây chuyền chính xác, hiệu_quả để quá trình sản xuất diễn ra trơn tru.
Nhận thức rõ tầm quan trọng của thiết lập trong việc đảm bảo chất lượng và hiệu suất, đồng thời phối hợp tốt để hỗ trợ giao hàng đúng thời hạn và hài lòng khách hàng.
------
Job Summary:
Reporting to the SMT Supervisor, the SMT Set-Up Technician is responsible for preparing and setting up SMT equipment prior to production runs. This includes staging feeders, loading programs, verifying materials, and ensuring the line is configured accurately and efficiently per job requirements. The role is critical to minimizing downtime and ensuring high-quality assembly in a fast-paced manufacturing environment.
Essential Duties and Responsibilities:
- Feeder and Component Setup: Stage and load feeders per the setup sheet and Bill of Materials (BOM); ensure correct part numbers, quantities, and orientation.
- Line Configuration: Configure pick-and-place machines, solder paste printers, and reflow ovens to match job specifications and production requirements.
- Program Loading: Load and verify machine programs, stencil data, and inspection files; communicate discrepancies to Engineering as needed.
- Material Verification: Ensure all materials, including PCBs, components, and stencils, are correct and available prior to job start.
- First Article Support: Assist with First Article builds by verifying placements and providing documentation support to the Quality and Engineering teams.
- Documentation and Traceability: Ensure accurate scanning and traceability of components and boards using the shop floor control system.
- SMT Equipment Maintenance: Perform basic maintenance tasks and checks on feeders and machines to ensure smooth operation; escalate issues when needed.
- Job Changeover: Support efficient job changeovers by tearing down previous setups and preparing for the next build with minimal downtime.
- Safety and ESD Compliance: Follow proper ESD handling and workplace safety procedures at all times.
Other Duties: Additional tasks as required to support production and quality standards.
Minimum Qualifications:
- 2+ years of experience in SMT line setup or SMT production support.
- Familiarity with SMT equipment and feeder setup processes (Yamaha, Fuji, or equivalent preferred).
- High school diploma required; technical training in electronics is a plus.
- Ability to read and interpret BOMs, setup sheets, assembly drawings, and work instructions.
- Basic understanding of component identification, orientation, and handling.
- Must be able to lift 20–30 lbs. and stand for long periods.
Skills and Competencies:
- Strong organizational and time-management skills.
- Detail-oriented with high accuracy in setup and material verification.
- Proficient in using barcode scanners and shop floor data collection systems.
- Effective communication skills to coordinate with operators, engineers, and supervisors.
- Ability to work in a fast-paced, high-mix production environment.
Ideal Candidate Profile:
The ideal candidate is dependable, detail-oriented, and takes pride in accurate, efficient setups that enable smooth production runs. They understand the critical role setup plays in quality and throughput and work collaboratively to support on-time delivery and customer satisfaction.
If you have any questions, please feel free to contact Anna at + 84 966 10 50 57, or send your cv to: anna.n@omega-ems.com
Thank you!
Job Type: Full-time
Application Deadline: 2025/08/20
Expected Start Date: 2025/09/22