[English below]
Tóm tắt công việc:
Báo cáo cho Quản lý sản xuất, Nhân viên vận hành máy AOI (Kiểm tra quang học tự động) chịu trách nhiệm vận hành và giám sát thiết bị AOI để kiểm tra lỗi sản xuất trên các cụm bảng mạch in (PCBA). Vị trí này đảm bảo sản phẩm tuân thủ tiêu chuẩn IPC, đồng thời hỗ trợ cải tiến liên tục bằng cách nhận diện lỗi lặp lại và chuyển tiếp kịp thời đến các bộ phận liên quan.
Nhiệm vụ và trách nhiệm chính:
- Vận hành máy AOI: Thiết lập, vận hành và giám sát máy AOI theo Hướng dẫn quy trình sản xuất (MPI) và tiêu_chí kiểm tra.
- Kiểm tra và xác nhận lỗi: Xác minh trực quan các lỗi được hệ thống phát hiện bằng kính lúp, kính hiển vi; xác_định tính hợp lệ và phân loại linh kiện tương ứng.
- Thực hiện chương trình kiểm tra: Nạp và chạy chương trình AOI theo hướng dẫn công việc; đảm bảo sử dụng đúng chương trình cho từng đơn hàng.
- Ghi nhận dữ liệu: Ghi nhận kết quả kiểm tra chính xác vào nhật ký sản xuất và hệ thống theo dõi lỗi.
- Báo cáo và truyền đạt: Thông báo lỗi chất lượng phát hiện được cho bộ phận Kỹ thuật Quy trình hoặc Chất lượng để xử lý và khắc phục.
- Bảo trì hằng ngày: Vệ sinh và bảo trì đơn giản thiết bị AOI; báo cáo kịp thời các sự cố kỹ thuật cho bộ phận bảo_trì hoặc kỹ sư.
- Xác minh lệnh sản xuất: Đảm bảo sử dụng đúng phiên bản lệnh sản xuất và thực hiện đầy đủ quy trình quét mã_vạch và theo dõi lô.
- Tuân thủ ESD và MSD: Thực hiện đúng quy trình xử lý thiết bị nhạy cảm tĩnh điện (ESD) và thiết bị nhạy cảm độ_ẩm (MSD).
- Duy trì khu vực làm việc: Giữ khu vực kiểm tra sạch sẽ, ngăn nắp và an toàn; tuân thủ tiêu chuẩn 5S và nội quy vệ sinh công nghiệp.
• Hỗ trợ nhóm sản xuất: Hỗ trợ bộ phận SMT bằng việc kiểm tra thủ công hoặc các công việc sản xuất khác khi nhu_cầu kiểm tra AOI thấp.
Các nhiệm vụ khác: Thực hiện thêm các công việc phát sinh để hỗ trợ quá trình sản xuất và đảm bảo chất lượng.
Yêu cầu tối thiểu:
- Tối thiểu 2 năm kinh nghiệm vận hành máy AOI trong môi trường sản xuất điện tử.
- Ưu tiên ứng viên quen thuộc với các hệ thống AOI như Koh Young, CyberOptics, Mirtec hoặc tương đương.
- Tốt nghiệp THPT bắt buộc; đào tạo kỹ thuật điện tử là điểm cộng.
- Có khả năng đọc hiểu bản vẽ lắp ráp và tiêu chí kiểm tra.
- Nắm vững tiêu chuẩn IPC-A-610 về sản phẩm điện tử chấp nhận được.
- Kỹ năng giao tiếp tốt và chú ý đến chi tiết.
- Có thể ngồi hoặc đứng làm việc trong thời gian dài và nâng vật nặng đến 11kg.
Kỹ năng và năng lực:
- Thành thạo máy tính cơ bản cho nhập dữ liệu và vận hành chương trình.
- Thị lực tốt và độ khéo léo cao trong kiểm tra chi tiết tinh vi.
- Có khả năng nhận diện xu hướng lỗi và phản hồi hiệu quả cho nhóm.
- Kỹ năng phối hợp và làm việc nhóm tốt trong môi trường sản xuất tốc độ cao.
- Cam kết chất lượng, độ chính xác và cải tiến liên tục.
Hồ sơ ứng viên lý tưởng:
Ứng viên lý tưởng có khả năng quan sát xuất sắc, hiểu rõ quy trình kiểm tra và chủ động trong kiểm soát chất lượng. Đáng tin cậy, tỉ mỉ và luôn sẵn lòng hỗ trợ mục tiêu công ty về phòng ngừa lỗi, giao hàng đúng hẹn và sự hài lòng của khách hàng.
----------
Job Summary:
Reporting to the Production Supervisor, the AOI (Automated Optical Inspection) Operator is responsible for operating and monitoring AOI equipment to inspect printed circuit board assemblies (PCBAs) for manufacturing defects. This role ensures quality compliance with IPC standards and supports continuous improvement by identifying recurring issues and escalating them to the appropriate teams.
Essential Duties and Responsibilities:
- AOI Machine Operation: Set up, operate, and monitor AOI machines according to Manufacturing Process Instructions (MPI) and inspection criteria.
- Inspection and Defect Verification: Perform visual verification of flagged defects using magnification tools and determine validity; disposition parts accordingly.
- Program Execution: Load and execute AOI programs as specified per job instructions; ensure the correct program is used for each build.
- Record Keeping: Document inspection results accurately in production logs and defect tracking systems.
- Escalation and Communication: Communicate detected quality issues to Process Engineering or Quality teams for review and corrective action.
- Daily Maintenance: Conduct basic cleaning and maintenance of AOI machines; report any equipment issues to maintenance or engineering promptly.
- Work Order Verification: Ensure the correct revision of work orders is used and that barcode scanning and lot tracking procedures are followed.
- MSD and ESD Compliance: Follow moisture-sensitive device (MSD) and electrostatic discharge (ESD) handling protocols.
- Workstation Organization: Maintain a clean, organized, and safe inspection area; comply with 5S and housekeeping standards.
- Support Team Needs: Assist the SMT team during low AOI demand by supporting manual inspection or production tasks as assigned.
Other Duties: Additional tasks as required to support production and quality standards.
Minimum Qualifications:
- 2+ years of experience operating AOI machines in an electronics manufacturing environment.
- Familiarity with AOI platforms such as Koh Young, CyberOptics, Mirtec, or equivalent is preferred.
- High school diploma required; technical training in electronics is a plus.
- Ability to read and interpret assembly drawings and inspection criteria.
- Knowledge of IPC-A-610 standards for acceptability of electronic assemblies.
- Strong communication skills and attention to detail.
- Physically able to sit or stand for extended periods and lift up to 25 lbs.
Skills and Competencies:
- Basic computer proficiency for data entry and program operation.
- Excellent visual acuity and manual dexterity for fine detail inspection.
- Ability to identify trends in defect types and provide feedback to the team.
- Strong teamwork and collaboration skills in a fast-paced production environment.
- Commitment to quality, accuracy, and continuous improvement.
Ideal Candidate Profile:
The ideal candidate will have a strong eye for detail, a solid understanding of inspection processes, and a proactive approach to quality assurance. They will be dependable, thorough, and eager to support the company's focus on defect prevention, on-time delivery, and customer satisfaction.
If you have any questions, please feel free to contact Anna at + 84 966 10 50 57, or send your cv to: anna.n@omega-ems.com
Thank you!
Job Type: Full-time
Application Deadline: 2025/08/15
Expected Start Date: 2025/09/03